There are different concrete repair and maintenance methods for damaged floor repairing. Mostly all methods involve applying an extra layer over the existing floor. The extra layer is either of concrete or concrete-like topping. Cracking is one of the most common problems of concrete flooring and is repairable as well. However, not all damages are repairable. In fact, the small cracks or hairline, delamination, and small holes are only repairable. In case of drastic damages, the best solution is complete reflooring.

For the floor, restoration follows the following systematic steps. These steps ensure effective floor mending.

Steps:

  • Find the cause of deterioration
  • Estimate the damage extent
  • Figure the extent of repair need
  • Choose a suitable floor damage repairing method
  • Prepare the existing concrete for repair
  • Implement repair method properly

 

Concrete Repair materials: Sealers and Coatings

Concrete sealing compounds are used to restore the damages. This helps to prevent water penetration and further corrosion of the floor. Also, these compound assists in the prevention of chemicals damages to the floor. Again, these compounds are only suitable for low-level damages repair.

 

When to Repair Concrete Floors?

Whenever you found a little damage on the floor, it is the best time to mend it. Since it can lead to further corrosion and damage the floor deep. As you know in case of extreme damage the alternative is the complete renewal of the floor. The renewal means more money, so the better option is an on-time restoration which is a much more cost-effective method.

 

Best Concrete Repair and Maintenance Methods:

Choose the suitable method for your concrete floor repairing from the following methods. The concrete flooring due to its cracking problem is not favorite flooring option now. The trend is now shifting toward advanced epoxy flooring technology. If you want to know why here’s the article Know why more people want Epoxy Flooring Paint in the home just go through it.

 

Micro-Toppings: Concrete Repair and Maintenance Method

Micro toppings are 1/8-inch thin layer constituent of polymer modified concrete and sand. Such topping is applied with a trowel or brushes depending on desired look and extent of the damage. Also, these toppings are very thin and dry quickly, so the final texture is limited. The restoring time with this method is 24-36 hours. Further, it is necessary to seal micro toppings as they are porous and susceptible to dirt adhering. It is very difficult to remove the dirt once stuck to micro-toppings. Furthermore, micro toppings need two or more coats depending on the damage extent. Also, if you need a smooth finishing with micro-topping you can exclude the sand element. Micro toppings are suitable for floor scratches repairing.

 

Stamped Concrete: Concrete Repair and Maintenance Method

Stamped concrete is like micro-topping however it contains more sand elements. So, this more sand gives a rougher texture than micro toppings. Stamped concrete is also applied in a thin layer that is 1/4 to 5/8 inches from the old floor layer.
Moreover, the stamped concrete offers more color ranges and textures to create. You can texture the stamped concrete with a stamping tool and give the appearance of stone, tile, brick, or any desired or required appearance. It is the best method for cosmetic restoration of the floor. This method was famous for exterior in old days but is now adapted for interior floor repairing as well. Further, the stamped concrete finish also requires the coat of sealer after application.

 

Self-Leveling Underlayment and Topping

Sell leveling topping is a thick layer method that is preferred for deep surface damages like holes, larger cracks, and uneven surfaces. It forms about an inch thick layer which makes it a more durable option for damages restoration. Like stamp concrete it has a dying option too, you can dye it either during initial mixing or after the application.
Furthermore, it is classified into two types: underlayment and toppings. Underlayment as the name suggests is applied to the subfloor for surface smoothing or leveling while the topping is applied as main floor covering and does not requires further covering and sealings.

 

Resin Injection: Concrete Repair and Maintenance Method

This method is the solution for the concrete cracks and delamination problems. In this method, epoxy resin is basically used to structurally cracks rebounding and polyurethanes for crack sealing to prevent water leakage.
Furthermore, concrete flooring due to its ample drawback is not the likely flooring method. Instead, epoxy flooring the new technology has mostly replaced it because of its durability and many other characteristics. If epoxy flooring interests you, you then need epoxy flooring services in Dubai then book a schedule with 2painter the top-notch epoxy flooring paint services provider.

 

Pin It on Pinterest

Share This

Share this post with your friends!